loi current pending sector count

What is Current Pending Sector Count? What would you vì thế when encountering Current Pending Sector Count caution? How lớn fix SMART Current Pending Sector Count? This post answers all of these questions. In addition, use MiniTool software lớn keep data safe when coming across Current Pending Sector Count.

What Is Current Pending Sector Count?

CrystalDiskInfo is a tool that is used lớn monitor the hard drive and show the health status of the hard drive. If your hard drive is unhealthy, you may receive the Current Pending Sector Count caution.

Bạn đang xem: loi current pending sector count

Current Pending Sector Count is a S.M.A.R.T parameter that shows the current count of the unstable sectors on your disk which should be remapped. The value data of the current pending sector may vary depending on the actual situations. It may show as 1, 2, 100, etc, as showing in the following picture:

And if these sectors are read successfully later, the count will decrease and the Reallocated Sector Count will increase.

However, if the Current Pending Sector Count increases, it indicates that drive failure is imminent. Pending Sectors are the prediction of reallocated sectors which can also be a strong indicator of dead of the hard drive.

So if you receive Current Pending Sector Count caution, what you immediately need vì thế is lớn keep the data on the hard drive safe.

Therefore, in the following part, we will walk you through how lớn keep data safe when receiving Current Pending Sector Count caution.

How lớn Keep Data Safe When Coming Across Current Pending Sector Count?

To avoid data loss due lớn hard drive failure or the increasing current pending sector count, you need back up files immediately. In this way, you don’t worry that the increasing current pending sectors would lead lớn hard drive failure and data loss.

If you don’t know how lớn back up files on the hard drive, continue your reading. The following part shows you the step-by-step guide on backing up files.

To back up files on the hard drive, the professional backup software – MiniTool ShadowMaker is strongly recommended. MiniTool ShadowMaker is designed lớn back up the operating system, files, folders, partitions, and disks.

Besides the backup feature, MiniTool ShadowMaker provides another feature lớn keep data safe. It is the Sync feature. It enables you lớn sync files lớn two or more locations. You can click here lớn know how lớn sync files.

So with so sánh many features lớn keep data safe on the hard drive, tải về MiniTool ShadowMaker Trial from the following button lớn back up files or choose lớn purchase an advanced one.

MiniTool ShadowMaker TrialClick lớn Download100%Clean & Safe

Now, we will demonstrate how lớn back up files with the step-by-step guide.

Step 1: Install and launch MiniTool ShadowMaker

1. Download MiniTool ShadowMaker and install it on your computer.
2. Launch it.
3. Click Keep Trial.

Step 2: Select backup source

1. After entering its main interface, go lớn the Backup page.
2. Click SOURCE module lớn choose backup source.
3. In the pop-up window, choose Folders and Files. If you want lớn back up hard drive or partition, choose Disks and Partitions.

Step 3: Select backup destination

1. Returning back lớn the Backup page, click DESTINATION to choose a destination path lớn save the backup image.
2. Here are five available paths which are User, Libraries, Computer, and Shared. It is recommended lớn save the backups lớn an external hard drive. Thus, choose a partition in Computer section and click OK lớn continue.

Step 4: Start lớn back up files

1. After selecting the backup source and destination, click Back Up Now lớn perform the task immediately.
2. Or you can click Back Up Later lớn delay the task, but you need lớn restart it on the Manage page.

When all steps are finished, you have successfully backed up files. Even though you encounter the increasing Current Pending Sector Count or other problems leading lớn hard drive failure, you don’t worry about data loss.

Besides backing up files or hard drive lớn keep data safe, if there are a lot of files on the hard drive, you can also choose lớn clone the whole hard drive lớn another one. The Disk Clone feature of MiniTool ShadowMaker plays an important role.

When I received Current Pending Sector Count caution, I used MiniTool ShadowMaker lớn back up files so sánh as lớn keep my files safe. Click lớn Tweet

After keeping data safe on the imminent failure hard drive, vì thế you know how lớn fix or decrease the SMART Current Pending Sector Count?

How lớn Fix or Decrease Current Pending Sector Count?

In this part, we will walk you through some Current Pending Sector Count fixes. If you receive Current Pending Sector Count caution, try these fixes.

Solution 1. Run Chkdsk Command

The first way you can try is lớn run rẩy chkdsk command. The chkdsk command can inspect all sectors on the hard drive for the read/write operations. If some sectors don’t respond lớn the request made by scan, the chkdsk command can mark them as bad sectors and reallocate them. So, this way may help lớn fix or decrease the Current Pending Sector Count.

Now, we will show you the detailed operations.

Step 1: Open Command Prompt

1. Type Command Prompt in the tìm kiếm box of Windows and choose the best-matched one.
2. Right-click it lớn choose Run as administrator.

Step 2: Type the command

1. In the pop-up window, type the command chkdsk /r /f X: and hit Enter lớn continue. The X represents the drive letter.
2. Then type Y lớn continue.

When the process is finished, you can run rẩy CrystalDiskInfo tool again lớn kiểm tra whether you have fixed the Current Pending Sector Count or the value data is declined.

How Do I Repair Hard Drive Error with Windows 10 CHKDSK Utility?

If this solution does not work, try the following solutions.

Solution 2. Perform Full Format or Wipe Drive

It is likely that the drive may misread the information on the sector count. In this situation, you can choose lớn force the drive lớn re-read these pending sectors lớn lower the sector count value. In this way, you need lớn full format the hard drive or wipe the hard drive.

Now, we will show you how lớn secure-erase the hard drive with the step-by-step guide.

Way 1. Perform Full Format

Step 1: Open Disk Management

1. Press Windows and R key together lớn open Run dialog.
2. Then type diskmgmt.msc in the box and click OK lớn continue.

Step 2. Perform full format

1. In the Disk Management window, select the drive you want lớn erase and choose Format… lớn continue.
2. In the pop-up window, mix some partition parameters and uncheck the option Perform a quick format and click OK lớn continue.

When the process is finished, you can reboot your computer and run rẩy CrystalDiskInfo tool lớn kiểm tra whether you have fixed or decreased the Current Pending Sector Count value.

Xem thêm: sinh nam 1990 hop voi tuoi nao

Way 2. Wipe a Hard Drive

Besides the above way lớn secure-erase a hard drive or partition, you can also choose lớn wipe the partition or hard drive.

To wipe a hard drive, the không tính tiền partition management tool – MiniTool Partition Wizard is recommended. It can help you lớn wipe a hard drive with ease.

Now, we will show you how lớn secure-erase a partition or a drive with MiniTool Partition Wizard.

Step 1: Download and install MiniTool Partition Wizard.

1. Download MiniTool Partition Wizard from the following button.
2. Install it.
3. Launch it lớn enter its main interface.

MiniTool Partition Wizard FreeClick lớn Download100%Clean & Safe

Step 2: Wipe a hard drive

1. Select the disk you want lớn erase and right-click it. Then choose Wipe Disk.
2. Choose a wiping method. The more advanced wipe method may take a longer time. Then click OK lớn continue. Please note that data cannot be recovered after wiping.

Step 3: Confirm changes

After that, you can find that the selected disk becomes unallocated and you need lớn click Apply lớn confirm the change.

After wiping hard drive, you can kiểm tra the hard drive again and kiểm tra whether you have fixed or decreased the Current Pending Sector Count value.

Solution 3. Replace Hard Drive

If your hard drive is still under warranty, you can consider contacting the manufacturer for a hard drive replacement.

Before replacing hard drive, please back up your files first. To get more fix trying, you can watch the following video:

These ways successfully helped bầm lớn lower the Current Pending Sector Count value and also protected my files. Click lớn Tweet

How lớn Recover Data If Hard Drive Is Failed?

However, as we have mentioned in the above part, the Current Pending Sector Count caution indicates the imminent hard drive failure and the abnormal Current Pending Sector Count value is a sign of hard drive failure.

So, what can you vì thế if you unfortunately come across hard drive failure due lớn the abnormal Current Pending Sector Count value? As a matter of fact, if a hard drive is failed, lớn recover data is the most important thing especially when you have not backed up before.

Hence, in this section, we will show you how lớn recover data if the hard drive is failed due lớn the abnormal or the increasing Current Pending Sector Count value or other reasons.

To recover data, you can take advantage of professional data recovery software. Thus, MiniTool Partition Wizard Pro Ultimate is strongly recommended. It can help lớn recover various types of files such as Word documents, excels, photos, PDF files, etc.

With its powerful features, you can get one from the following button.

We will show you how lớn recover data from the failed hard drive with MiniTool Partition Wizard Pro Ultimate.

Step 1: Launch MiniTool Partition Wizard Pro Ultimate

1. Get MiniTool Partition Wizard Pro Ultimate and install it.
2. Launch it lớn enter its main interface.

Step 2: Start lớn recover data

1. After entering its main interface, click Data Recovery from the toolbar lớn continue.

2. In the pop-up window, select the partition and click Scan. You can also select the whole hard disk on the Hard Disk section lớn scan.

3. Then the software will begin lớn scan your hard drive. The scanning time depending on the number of files on the hard drive. When the scanning process is finished, select the files you need and click Save lớn continue. It is recommended lớn save the files lớn another hard drive.

When all steps are finished, you can successfully recover data from the failed hard drive. So, if your hard drive is failed due lớn the increase Current Pending Sector Count or other reasons, try MiniTool Partition Wizard Pro Ultimate lớn get them back.

Bottom Line

To sum up, this post has introduced what the Current Pending Sector Count is and what you should vì thế when encountering Current Pending Sector Count caution.

It also has introduced how lớn decrease the Current Pending Sector Count value. If you have any better solution, you can share it in the comment zone.

The Current Pending Sector Count indicates the imminent failure of hard drive. If you encounter this caution, please back up data firstly. If you have any problem with MiniTool products, please tương tác us via the tin nhắn [email protected].

Current Pending Sector Count Fix FAQ